LAS VEGAS, NV — ISO 9001:2015
Sheet metal fabrication, all under one roof.
Press brake forming to 200 tons, robotic and manual welding, CNC punching, finishing, hardware insertion, and assembly. Co-located with our fiber laser cell — zero freight between cutting and forming.
- Max brake tonnage
- 200 tons
- Max bend length
- 4 m
- Quality pass rate
- 99.9%
- Units shipped
- 1M+
Services
Every operation that gets between sheet and assembly.
Forming
Press Brake Forming
CNC press brake forming up to 200 tons / 4 m bend length. ±0.5° bend angle, ±0.1 mm bend position. Hemming, offsets, and Z-bends in-house.
- 4000 mm max bend length
- 200 tons max tonnage
- 5 mm min flange length
View capabilities
Welding
Robotic and Manual Welding
Robotic MIG and TIG welding cells for production runs, plus manual MIG/TIG/spot for prototype and complex one-off work. Welders qualified to AWS D1.1/D1.2.
- 2 robotic cells
- 0.9 – 1.2 mm wire size range
- 1.5 × 2 × 1 m max assembly envelope
View capabilities
Punching
CNC Punching
CNC turret punching for high-throughput hole-pattern work, louvres, embosses, and forming features that laser cutting can't produce in a single setup.
- 1500 × 3000 mm max sheet size
- 6 mm max thickness
- 32 tool stations
View capabilities
Finishing
Finishing and Coating
Deburring, edge break, powder coating, wet paint, anodizing, plating — finished parts ready for assembly or direct shipment.
- 2 in-house deburr cells
- 24 hours powder coat turn (in-house)
- 40+ powder colors stocked
View capabilities
Assembly
Assembly and Sub-Assembly
Final assembly, sub-assembly, hardware insertion, kitting, packaging, and ship-direct programs. Buy parts, receive finished products.
- 4 assembly bays
- PEM-rated hardware press
- 300–500 units daily packout capacity
View capabilities
Co-located with laser cutting
Cut on site. Formed on site. Welded on site. Finished on site.
Our fiber laser cell sits in the same building. A part cut at 8 AM is on the press brake by 10. Zero inter-cell freight. Single-PO ownership. One inspection report covering the entire build.
- UL Listed
- ISO 9001:2015
- AWS D1.1/D1.2 welding
Common questions
- What sheet metal services do you offer in-house?
- Press brake forming (50–200 ton range), robotic and manual welding, CNC punching, hardware insertion, finishing (deburr, surface treatment), in-house powder coating, and full assembly. All under one roof with one quality system.
- What is the largest sheet you can form?
- 4 m bend length on our largest press brake. Above that we either pre-form on the laser, weld sub-assemblies, or use roll forming.
- Do you offer powder coating in-house?
- Yes — powder coating is in-house on a 24-hour finishing turn. Wet paint, anodizing, and plating run through co-located partners we manage under one quality system.
- How are you different from a typical sheet metal shop?
- We are part of Nevatronix — a precision manufacturer with 1M+ units shipped and a 99.9% quality pass rate. We bring full PPAP-grade documentation, ISO 9001:2015 controls, and a co-located laser cutting cell (nevatronixlaser.com) to every project.
Send us the part. We'll handle the rest.
Upload a STEP file and a print. One business day later, you'll have quote, DFM notes, lead time, and a route map of every operation we'll run on the part.